Palm oil press machine processing plant

Introduction main machines of palm oil press machine processing plant:

1. Sterilizing section in palm oil processing plant:
In general, fresh fruit bunches should be sent into palm oil press plant
in 24 hours after harvest to prevent palm oil acid value increase caused by fatty enzymes. Palm bunches sterilizing also inactivate fatty enzyme with high temperature to prevent enzyme break palm oil chemical structure.


 

2. Threshing section in palm oil processing plant:
The palm fruit proportion is about 60% of the FFB. In this section, we always use rotating drum thresher to separate palm fruit from the bunches.


 

3.Digesting section in palm oil processing plant:
The purpose of crushing is to destroy palm skin, separate the palm pulp and nuts, pound palm pulp and to damage the cell structure of palm pulp by heating at the same time, which avail the latter pressing section.
 

4. Pressing machine in palm oil processing plant:
In palm oil press machine, palm oil screw press is common equipment we use, the output of which is mixture of water, oil &residue and presscake (fiber cake).





 

5. Subsidence and filtration section in palm oil processing plant:
Separate the fiber from the mixture derived from pressing by subsidence and filtration, after continuous subsidence we can separate oil and precipitate. With another filtration and vacuum drying, the oil is just crude palm oil as we say.